To Edit In-Place Door and Window Assembly Divisions

Use this procedure to edit divisions using in-place editing with the Edit Grid grip. With in-place editing, you can edit the door/window assembly directly and interactively in the drawing area, and later save the changes to the door/window assembly or door/window assembly style.

1. Select a door/window assembly on which you want to edit divisions on screen with in-place editing.
2. Specify the mode in which to edit the door/window assembly:

   If you want to…	Then…
   edit this instance of the door/window assembly	click Door/Window Assembly tabModify panelDesign Rules drop-downTransfer To Object.
   edit the door/window assembly style	click Door/Window Assembly tabModify panelDesign Rules drop-downRevert to Style Design Rules. If this option is not available, the design rules are already style-based for the door/window assembly.

3. Click the Edit Grid grip.
   Note: Alternatively, you can click Door/Window Assembly tab Modify panel Division drop-down Edit.
4. Enter d (Division in place) and press Enter.

   For example, if you want to edit the primary grid, select an edge on the outer door/window assembly frame.

   Note: You have entered the in-place editing session now. You can see this from the faded color of all objects in the drawing, as well as from the different grips at your disposal. Note that while you are in the in-place editing session, you have only limited editing access to other commands in the drawing. Before working on other objects, you should first end the in-place editing session.
   

   Viewing Edit In Place grips

5. Edit the division:

   If you want to…	Then…
   add a bay to the grid	click the Add Bay grip.
   remove a bay from the grid	click the Remove Bay grip.
   change the start offset of the grid	select the Start Offset grip and move it to the appropriate position.
   change the end offset of the grid	select the End Offset grip and move it to the appropriate position.
   change the spacing of bays	click the Auto Grid Bay Spacing grip and move it to the appropriate position.
   manually edit the grid	Click Edit In Place tabDivision panelConvert To Manual. You can manually add and remove gridlines, change the offsets, and change the position of individual gridlines.
   use a worksheet to edit the cell dimensions	click the Set Fixed Cell Dimension Rules command grip, and edit the values in the worksheet.

6. Save or discard changes to the door/window assembly grid:

   If you want to…	Then…
   exit the in-place editing session without saving your changes	click Edit in Place tabEdits panelCancel.
   exit the in-place editing session after saving your changes	click Edit in Place tabEdits panelFinish. If you edited the grid by instance, the changes are saved to the design rules for the individual grid. If you edited the door/window assembly style, the Save Changes dialog box is displayed.

7. In the Save Changes dialog box, specify to which division to save the changes:

   If you want to…	Then…
   save the changes to the style in the current door/window assembly division	verify the current division is selected for Save Changes to Existing Division, and click Save. The changes are made in the style and affect all door/window assemblies of that style in the drawing.
   create an override to the style by saving the changes in a new door/window assembly division	click New, enter a name for the new division override, and click OK. Click Save. The changes are saved as an override to the style, and affect only the door/window assemblies to which the override is applied.