To Reverse the Roof Line or Floor Line of a Wall

Use this procedure to reverse the conditions applied to the roof line or the floor line of a wall. Reversing the roof line or the floor line does not reverse the start point and endpoint of the wall.

The following illustration shows reversing the roof line of a wall.

Reversing the roof line of a wall

The following illustration shows reversing the floor line of a wall.

Reversing the floor line of a wall

1. Select the wall that has the roof line or floor line you want to change.
2. Click Wall tabModify panelRoof/Floor Line drop-downEdit In Place.

   A temporary profile is created for you to edit the geometry of the roof line or the floor line.

3. Select the profile.
4. Click Edit in Place tabProfile panelReverse.
5. Select the roof line or the floor line.

   The selected line is reversed; the condition is applied to the opposite end of the line.

6. Save or discard the changes:

   If you want to …	Then …
   restore the roof line and the floor line to their shape before editing	click Edit In Place tabEdits panelCancel.
   save the changes	click Edit In Place tabEdits panelFinish. The wall uses the edited profile to define its geometry.