To Change the Outside Edge of a Spiral Stair

Use this procedure to change the outside edge of a spiral stair. You can change the edge in two ways:

• When you use the Flight Width grip point, you uniformly change the width of the stair along the entire arc. The endpoints of the outer edges of the stair move. This changes the size of the stair.
• When you click the Flight Width grip point and press Ctrl, you maintain the center of the stair and the outside grip points. This changes the shape of the stair.

1. Select a spiral stair.
2. Change a spiral stair:

   If you want to…	Then…
   uniformly change the width of a spiral stair along the entire arc	click the Flight Width grip of the spiral stair.
   maintain the center and outside grip points while changing the shape of a spiral stair	click the Flight Width grip of the spiral stair and press Ctrl.

3. Move the grip to change the size or shape of the stair.
   

   Using grips to change the flight width of a spiral stair run

   

   Using grips to change the shape of a spiral stair run by adding an edge

4. Right-click, and click Deselect All to turn off grips.