To Change the Location of a 2D or 3D Section

You can relocate a section by changing the coordinate values of its insertion point. The section also has an orientation with respect to the WCS or the current UCS. For example, if the top and bottom of the section are parallel to the XY plane, its normal is parallel to the Z axis. You can change the orientation of the section by aligning its normal with another axis. You can also rotate the section on its plane by changing the rotation angle.

1. Double-click the section you want to move.
2. On the Properties palette, click the Design tab, expand Basic, and expand Location.
3. Click Additional information.
4. Specify a new location or rotation:

   If you want to…	Then…
   relocate the section	enter new coordinate values under Insertion Point.
   locate the section on the XY plane	make the normal of the section parallel to the Z axis: under Normal, enter 1 for Z, and enter 0 for X and Y.
   locate the section on the YZ plane	make the normal of the section parallel to the X axis: under Normal, enter 1 for X, and enter 0 for Y and Z.
   locate the section on the XZ plane	make the normal of the section parallel to the Y axis: under Normal, enter 1 for Y, and enter 0 for X and Z.
   change the rotation of the section	enter a new value for Rotation Angle.

5. Click OK.