To Merge a Profile With a Wall Endcap Component

Use this procedure to modify a wall endcap by merging a profile with a component. A profile may be any polyline-enclosed area that overlaps or is coincident with a specific component.

  1. Select the wall segment with the wall endcap to modify.
  2. Click Wall tabEndcap panelEndcap Edit In Place.
  3. Select the component to which you want to merge the profile.

    You can only merge profiles with one component at a time. Press Esc to clear component selection.

  4. Click Edit In Place tabModify panelMerge.
  5. Select a profile to merge.
  6. Enter Y to erase selected linework, or N to keep it.
  7. If the merged profile overlaps another component that has a higher priority, the Wall Cleanup Edit in Place - Component Cleanup Override dialog box is displayed. Click Yes to have the merged profile override the overlapped component, click No have the overlapped component override the merged profile, or click Cancel to end without merging the profile with the component.
  8. Save or discard your changes:
    If you want to... Then...
    Save any changes you made during the edit-in-place session as a new style click Edit In Place tabEdits panelSave As.
    Discard any changes you made during the edit-in-place session click Edit In Place tabEdits panelCancel.
    Save any changes you made during the edit-in-place session click Edit In Place tabEdits panelFinish.

    In the following example, a profile is merged with a wall component.