Use this procedure to change the height of an extruded 3D space. An extruded space is not constrained in the z-direction, and all height components are user-definable. The sum of all components’ heights is the overall space height.
Note: This procedure is valid for associative and non-associative spaces.
- Double-click the space for which you want to change a height component.
- On the Properties palette, expand Basic, and expand Component Dimensions.
- Modify the height of the space:
If you want to… Then… specify the overall height of the space, including floor to ceiling height, ceiling and floor thickness, and space above ceiling and below floor enter a value for Overall space height. specify the ceiling height of the space enter a height value. The value you enter here is applied uniformly to the space. specify a floor thickness enter a value for Floor thickness. specify a ceiling thickness enter a value for Ceiling thickness. specify the distance between the top of the space ceiling to the top of the space enter the appropriate value for Height above ceiling. specify the distance between the bottom of the space floor and the bottom of the space enter the appropriate value for Height below floor. specify the combined height of ceiling height, ceiling thickness, and height above ceiling enter a value for Default surface height.