You can maintain a record of actions while attaching, detaching, and reloading xrefs, and while loading a drawing containing xrefs.
This log is maintained only if the XREFCTL system variable is set to 1. The default setting is 0.
The log file is an ordinary ASCII text file with the same name as the current drawing and the file extension .xlg. If you load a drawing with the file name sample.dwg, for example, the program searches for a log file named sample.xlg in the current folder. If the file does not exist, a new file is created with that name.
Once a log file has been created for a drawing, the program continues to append information to it. The program writes a title section to the log file each time the file is opened. If the log file becomes too large, you can delete it.
This title section contains the name of the current drawing, the date and time, and the operation being performed.
============================= Drawing: detail Date/Time: 09/28/99 10:45:20 Operation: Attach Xref =============================
During a detaching or reloading operation, the program includes the nesting level of all affected xrefs immediately following the title section. To see a reference tree for a set of xrefs in your current drawing, use Detach or Reload and check the resulting entries in the log file.
In the following example, the xref ENTRY_DR contains two nested xrefs: HARDWARE and PANELS. The xrefs HARDWARE and PANELS also each contain two xrefs.
============================== Drawing: detail Date/Time: 10/05/99 15:47:39 Operation: Reload Xref ============================= Reference tree for ENTRY_DR: ENTRY_DR Xref -HARDWARE Xref --LOCKSET Xref --HINGES Xref -PANELS Xref --UPPER Xref --LOWER Xref
The program writes an entry in the log file for each xref-dependent named object temporarily added to the current drawing and for any errors that occur. Most error messages are written both to the screen and to the log file.
The following example shows a partial listing of the log file entries generated when the external reference STAIR is attached to the working drawing test.dwg. The log file lists the definition (symbol) table affected and the name of the definition added, along with a status message.
============================== Drawing: test Date/Time: 12/18/99 14:06:34 Operation: Attach Xref ============================= Attach Xref STAIR: ACADDWGSSTAIR.dwg Searching in ACAD search path Update block symbol table: Appending symbol: STAIR|BOLT Appending symbol: STAIR|BOLT-HALF ... block update complete. Update Ltype symbol table: Appending symbol: STAIR|DASHED Appending symbol: STAIR|CENTER Appending symbol: STAIR|PHANTOM Ltype update complete. Update Layer symbol table: Appending symbol: STAIR|STEEL-HIDDEN Appending symbol: STAIR|OAK ... Layer update complete. STAIR loaded.