Selection Tab (Options Dialog Box)

Sets options for selecting objects.

OPTIONS (Command) Find

List of Options

The following options are displayed.

Pickbox Size

Sets the object selection target height, in device independent pixels. (PICKBOX system variable)

For 4K or higher resolution monitors, the ratio between pixels and device independent pixels (DIPs) is:

Pixel = DIPs*DPI/96

For monitors with lower resolution (100% scaling or 96 DPI), this setting is in pixels.

The pickbox is the object selection tool that appears in editing commands.

Selection Modes

Controls settings that relate to object selection methods.

Noun/Verb Selection

Controls whether you select objects before (noun-verb selection) or after you issue a command. (PICKFIRST system variable)

Many but not all editing and inquiry commands support noun/verb selection.

Use Shift to Add to Selection

Controls whether subsequent selections replace the current selection set or add to it. (PICKADD system variable)

To clear a selection set quickly, draw a selection window in a blank area of the drawing.

Object Grouping

Selects all objects in a group when you select one object in that group. With GROUP you can create and name a set of objects for selection. (PICKSTYLE system variable)

Associative Hatch

Determines which objects are selected when you select an associative hatch. If this option is selected, boundary objects are also selected when you select an associative hatch. (PICKSTYLE system variable)

Implied Windowing

Initiates the drawing of a selection window when you select a point outside an object. (PICKAUTO system variable)

Drawing the selection window from left to right selects objects that are entirely inside the window's boundaries. Drawing from right to left selects objects within and crossing the window's boundaries.

Allow Press and Drag on Object

Controls the window selection method. (PICKAUTO system variable)

If this option is cleared, you can draw a selection window by clicking two separate points with the pointing device.

Allow Press and Drag for Lasso

Controls the window selection method. (PICKAUTO system variable)

If this option is checked, you can draw a selection lasso by clicking and dragging with the pointing device.

Window Selection Method

Use the dropdown list to change the PICKDRAG system variable setting.

Object Limit for Properties Palette

Determines the limit of the number of objects that can be changed at one time with the Properties and Quick Properties palettes. (PROPOBJLIMIT system variable)

Selection Effect Color
Lists the available color settings to apply to the selection effect. You can choose one of the colors in the list or choose one of the AutoCAD Color Index (ACI) colors in the Select Color dialog box. (SELECTIONEFFECTCOLOR system variable)

Preview

Highlights objects as the pickbox cursor rolls over them.

When a Command Is Active

Displays selection previewing only when a command is active and the Select Objects prompt is displayed. (SELECTIONPREVIEW system variable)

When No Command Is Active

Displays selection previewing when no commands are active. (SELECTIONPREVIEW system variable)

Visual Effect Settings

Displays the Visual Effect Settings dialog box.

Command preview

Controls whether you can preview the outcome of the active command. (COMMANDPREVIEW system variable)

Property preview

Controls whether you can preview the changes to currently selected objects when you roll over drop-down lists and galleries that control properties. (PROPERTYPREVIEW system variable)

Note: Property previews are displayed only from the ribbon and the Properties palette. They are not available from other palettes.

Grip Size

Sets the size of the grip box, device independent pixels. (GRIPSIZE system variable)

For 4K or higher resolution monitors, the ratio between pixels and device independent pixels (DIPs) is:

Pixel = DIPs*DPI/96

For monitors with lower resolution (100% scaling or 96 DPI), this setting is in pixels.

Grips

Grips are small squares displayed on an object after it has been selected.

Grip Colors

Displays the Grip Colors dialog box where you can specify the colors for different grip status and elements.

Show Grips

Controls the display of grips on selected objects. Displaying grips in a drawing significantly affects performance. Clear this option to optimize performance. (GRIPS system variable)

Show Grips within Blocks

Controls the display of grips in blocks. (GRIPBLOCK system variable)

Show Grip Tips

Displays grip-specific tips when the cursor hovers over a grip on a custom object that supports grip tips. This option has no effect on standard objects. (GRIPTIPS system variable)

Show Dynamic Grip Menu

Controls the display of dynamic menu when pausing over a multi-functional grip. (GRIPMULTIFUNCTIONAL system variable)

Allow Ctrl-cycling Behavior

Allows the Ctrl-cycling behavior for multi-functional grips. (GRIPMULTIFUNCTIONAL system variable)

Show Single Grip on Groups

Displays a single grip for an object group. (GROUPDISPLAYMODE system variable)

Show Bounding Box on Groups

Displays a bounding box around the extents of grouped objects. (GROUPDISPLAYMODE system variable)

Object Selection Limit for Display of Grips

Suppresses the display of grips when the selection set includes more than the specified number of objects. (GRIPOBJLIMIT system variable)

The valid range is 1 to 32,767. The default setting is 100.

Ribbon Options

Contextual Tab States Button

The Ribbon Contextual Tab State Options dialog box is displayed, where you can set object selection settings for the display of ribbon contextual tabs.