Lists all the pins previously used in the project and the available pins that can be assigned to a component.
Find
Command entry:
AEEDITCOMPONENT
Select the component to edit. In the Insert/Edit Component dialog box, Pins section, click List.
|
Pin List |
The three lists display all available pins to assign to the component. The number in parenthesis () indicates the single or pair of pins for the component. Pins can be Unused NO Pairs, Unused Form-C contacts, and undefined. |
|
Sheet, Reference |
Displays the sheet number and potential reference line number where the connector definition is located in the project. |
|
Type |
Displays the contact type (for example, "NO" or "NC"). It is the value carried by the CONTACT attribute of the component. If no attribute is present or this attribute is blank, then this field is blank. |
|
Pins |
Displays the pin numbers already in use in the project. |
|
Wire Numbers |
Displays the wire numbers carried on wires attached to each of the pins above. If no wire connection to the pin, or if the wire does not carry a wire number assignment, then this field is blank. |