Annotates the text size, height and width sizes, and orientation of the non-intelligent terminal strip.
Terminal List (Manual Picks)
Command entry:
AETERMLIST
Select the terminal to modify and click OK.
Terminal List (From File).
Command entry:
AETERMLISTFROMFILE
Select the terminal to modify and click OK.
Terminal Text
|
Text |
Specifies to align the text to the left, center, or right side of the terminal strip. |
|
Height |
Sets the height of the terminal strip. |
|
Width |
Sets the width of the terminal strip. |
|
Layer |
Specifies the layer for the table text. The selected layer is displayed next to the button on the dialog box. |
Terminal pitch and Terminal width
|
Terminal pitch (spacing) |
Sets the spacing between entries in the terminal strip. |
|
Terminal width |
Sets the width for the terminal strip. |
|
Use .750 |
Changes the terminal width value to .750 if selected. |
Terminal Ruling
|
Box Around |
Creates a single box around the terminal strip. |
|
Between Entries |
Creates lines between entries in the terminal strip. |
|
Start Line |
Specifies which line the terminal strip starts at. |
|
End |
Specifies which line the terminal strip ends at. |
|
Layer |
Specifies the layer for the table ruling lines. The selected layer is displayed next to the button on the dialog box. |
Terminal Strip Orientation
|
Vertical |
Specifies to display the terminal strip vertically. |
|
Rotate 90 degrees (counter-clockwise) |
Specifies to rotate the terminal strip 90 degrees in a counter-clockwise direction. |
|
Rotate -90 degrees (clockwise) |
Specifies to rotate the terminal strip 90 degrees in a clockwise direction. |