Controls whether objects snaps are suppressed on hatch objects, geometry with negative Z values when using dynamic UCS, or dimension extension lines.
| Type: | Bitcode |
| Saved in: | Registry |
| Initial value: | 5 |
The setting is stored as a bitcode using the sum of the following values:
|
Value |
Description |
|---|---|
|
0 |
Object snaps operate on patterned hatch objects, on geometry with negative Z values when using a dynamic UCS, and on endpoints of dimension extension lines. A REGEN is required for snapping to hatch intersections after changing to this setting. A REGEN is recommended for performance reasons after changing from this setting to a value that includes 1. |
|
1 |
Object snaps ignore hatch objects. |
|
2 |
Object snaps ignore geometry with negative Z values during use of a dynamic UCS. (Not available in AutoCAD LT.) |
|
4 |
Object snaps ignore endpoints of dimension extension lines. |