- On the Properties palette, under Placement
Justification, specify the justification settings for pipe insertion:
If you want to… then… align the pipeline centerline along the points you specify for the pipe run under Justification, specify Center for Horizontal and Vertical. Specify offset values for each. align one side of the pipeline along the points you specify for the pipe run under Justification, specify from one of nine combinations of Left, Right, Top, or Bottom settings for Justify to align 2 sides along the insertion points. offset the pipeline by a uniform distance from the points you specify for the pipe run enter vertical and horizontal distance offsets.
You can optionally lock the pipe elevation property. See Pipe Elevation Lock and Locking Pipe Elevation During Drawing.