To Place a Pipe MvPart in a Drawing

  1. In the Piping workspace, click Home tabBuild panelEquipment drop-down and select a pipe MvPart.

    The Add MvParts dialog box displays the current part catalog for the tool you selected.

  2. On the Part tab, select a part subtype in the folder.
  3. Click Details to view available sizes.
  4. Select Display/Hide additional parameters to expand the contents of the parameters table.
  5. Click the Part Filter tab, and enter the desired criteria under Filter by Dimensions.
    Note: The part catalogs and content locations determine the parts you can add. If the part is unavailable, you can create a custom part using Content Builder.
  6. Select a part size name.
  7. Specify an elevation value.
  8. (Optional) Click the K-Factor tab to assign a K-factor value to sprinklers (listed under Fire Protection).
  9. Specify an insertion point in the drawing, and use the compass to specify a rotation angle.
  10. To add another existing MvPart, select the MvPart, click Equipment tab General panel Add Selected .
    Tip: You can also use the AutoCAD or commands in AutoCAD to add more MvParts.