The valves and branch pipes from the source radiator are copied to the target radiator even if the software cannot connect a target radiator to parallel pipes. You can then manually connect the branch pipes.
You can use Solution Tips to view information about connection failures and instructions for correcting them. See Showing Solution Tips.
The following conditions report a failed connection:
- The radiator is not parallel to the main pipes.
- The radiator is too close to the main pipe, preventing enough space for the fittings in the branch.
- The target radiator is placed on the wrong side of the pipes. The radiator might also be rotated 180 degrees.
- The radiators differ in type or orientation. For example, the target might be a single-panel radiator, and the source a two-panel radiator.
- The software could not find a match between all the connectors on the source radiator and the target radiator. In this case, some of the connections might have succeeded.