You can configure a gap to display between crossing objects or disable hidden lines for MvParts. These settings are applied to all objects in the drawing.
- Click
Options. - In the Options dialog box, click the MEP Display Control tab.
- Under Crossing Objects Display, specify one of the following:
If you want to… then… specify a gap to the outside of the crossing objects select Apply Gap to Outside, and then enter a value for Gap Width. specify a gap to the inside of the crossing objects select Apply Gap to Inside, and then enter a value for Gap Width. specify no gap to the outside of the crossing objects clear Apply Gap to Outside (the default). specify no gap to the inside of the crossing objects clear Apply Gap to Inside (the default). change the size of the gap as the annotation scales change select Apply Annotation Scale to Gap specify the gap size enter a value for the gap increase drawing performance when using hidden lines select Save Hidden Lines in Drawing. have hidden lines ignore MvParts select Disable Hidden Lines for MvParts.