Use these generic subassemblies to build assemblies.
| Image | Subassembly | Common Uses |
|---|---|---|
 |
LinkMulti: General purpose subassembly to add a series of connected links. Default Tool Palette: Generic Subassemblies |
Medians, curbs, other irregular structures |
 |
LinkOffsetAndElevation: Creates a link from the attachment point to a user specified offset (from the baseline) and elevation. Offset and elevation can be controlled by target parameters. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkOffsetAndSlope: Creates a link from the attachment point to a user specified offset (from the baseline) at a given slope. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkOffsetOnSurface: Creates a link from the attachment point to a target surface at a given offset (from the baseline). Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkSlopeAndVerticalDeflection: Creates a link from the attachment point to a given vertical direction along a given slope. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkSlopesBetweenPoints: Creates intersecting links between the attachment point and a marked point. An optional ditch width can be assigned to create a flat link in the middle. Default Tool Palette: Generic Subassemblies |
Ditch between adjacent or merging roadways |
 |
LinkSlopeToElevation: Creates a link from the attachment point to a given elevation along a given slope. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkSlopeToSurface: Creates a link from the attachment point to a given surface along a given slope. Default Tool Palette: Generic Subassemblies |
Simple daylighting. |
 |
LinkToLaneMarker: Marks a point on a lane subassembly from the attachment point to a specified width and slope. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkToMarkedPoint: Creates a link from the attachment point to a marked point. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkVertical: Creates a vertical link from the attachment point to a given vertical deflection or profile. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LinkWidthAndSlope: Creates a link from the attachment point to a given width along a given slope. Default Tool Palette: Generic Subassemblies |
General purpose |
 |
LotGrade: Creates different lot grading variations based on whether the general slope of the lot is up or down. Default Tool Palette: Generic Subassemblies |
Lot grading |
 |
MarkPoint: Creates a marked point which can be targeted by certain subassemblies. Default Tool Palette: Generic Subassemblies |
General purpose |