RolledCurb

The RolledCurb subassembly inserts links for a rolled curb shape concrete curb-and-gutter with subbase.

Attachment

The attachment point is at the curb lip or back of curb. This component can be attached to either the left or right side.

Input Parameters

Note: All dimensions are in meters or feet unless otherwise noted. All slopes are in run-over-rise form (for example, 4 : 1) unless indicated as a percent slope with a “%” sign.

Parameter	Description	Type	Default
Side	Specifies which side to place the subassembly	Left / Right	Right
Top of Curb	Top of curb	Numeric, positive	4.5 in 100 mm
Back Height	Back height	Numeric, positive	14.5 in 370 mm
Bottom Width	Bottom width	Numeric, positive	24 in 600 mm
Front Height	Front height	Numeric, positive	7 in 180 mm
Width To Flowline	Width to flowline	Numeric, positive	11.5 in 300 mm
Flowline Height	Flowline height	Numeric, positive	6.5 in 165 mm
SubBase Depth	Subbase depth	Numeric, positive	12 in 300 mm
Attachment Point	Attachment point	Lip, BackCurb	Lip

Target Parameters

This section lists the parameters in this subassembly that can be mapped to one or more target objects. For more information, see To Specify Corridor Targets.

None.

Runtime Logical Assignments

None.

Output Parameters

None.

Behavior

The curb and gutter links are inserted based on the Input Parameter dimensions. All dimensions must be positive, non-zero values.

The subassembly builds the shape for a simple curb and gutter, with the attachment point either at (a) lip of the gutter, or (b) the back of the curb.

Layout Mode Operation

In layout mode, this subassembly displays the curb-and-gutter component based on the input parameters given.

Point, Link, and Shape Codes

The following table lists the point, link, and shape codes for this subassembly that have codes assigned to them. Point, link, or shape codes for this subassembly that do not have codes assigned are not included in this table.

Point, Link, or Shape	Code	Description
P1	Flange
P6	BackOfCurb
P7, P8	CurbBottom
P9, P10	SubBase
L1-L5	Curb, Top
L8	CurbBottom
L9	Datum
S1	Curb
S2	SubBase

Coding Diagram