The SLOCityCurbs subassembly inserts links and shapes to create curbs, gutters, and sidewalks according to the City of San Luis Obispo Standard Plans.
You should verify that the dimensions used match your interpretation of the standard plan.
Curb and Gutter:
Curb:
Boardwalk Sidewalk:
Detached Sidewalk:
Integral Sidewalk:
The attachment point is at the Lip (or FS) and the Back of Curb. This component can be attached to either the left or right side.
Parameter |
Description |
Type |
Default |
---|---|---|---|
Side | Specifies which side to place the subassembly | Left / Right | Right |
Curb Type | Type of curb or curb and gutter | Curb 6" and 24" Gutter / Curb 8" and 24" Gutter / Curb 6" and 18" Gutter / Curb 8" and 18" Gutter / Curb 6" / Curb 8" | Curb 6" and 18" Gutter |
Attachment Point | Attachment point for the curb or curb and gutter | Lip or FS / Back of Curb | Lip or FS |
Sidewalk Type | What type of sidewalk should be used (or none) | Detached / Integral / Boardwalk / None | None |
C & G Base Thickness | The thickness of base below the curb and gutter | Numeric, positive |
0.5 ft 0.15 m |
S/W Base Thickness | The thickness of base under the sidewalk | Numeric, positive |
0.33 ft 0.10 m |
S/W Width | The width of the sidewalk | Numeric |
6 ft 2 m |
Landscape Width | The width of the landscape when using a detached sidewalk | Numeric |
3 ft 1 m |
This section lists the parameters in this subassembly that can be mapped to one or more target objects. For more information, see To Specify Corridor Targets.
Parameter |
Description |
Status |
---|---|---|
Detached Sidewalk Offset | May be used to override the fixed sidewalk width and tie the inside edge of sidewalk to an offset alignment. The following object types can be used as targets for specifying the width: alignments, polylines, feature lines, or survey figures. | Optional |
Back of Sidewalk Offset | May be used to override the fixed sidewalk width and tie the outside edge of sidewalk to an offset alignment. The following object types can be used as targets for specifying the width: alignments, polylines, feature lines, or survey figures. | Optional |
The dimensions of the curb and gutter are stored within the subassembly. At runtime the values are looked up and assigned based on the Curb Type selected.
None.
The initial point is set at the attachment point. The points, links, and shapes of the curb and gutter are built based on the Curb Type selected. Base is then placed under the curb and gutter.
If the sidewalk type is not None, then the appropriate sidewalk and base is built. If the sidewalk is Detached and the Detached Sidewalk Offset is set, then the inside sidewalk edge is adjusted. If the Back of Sidewalk Offset is set, then the widths of all sidewalk types are adjusted.
In layout mode, this subassembly displays the curb-and-gutter and sidewalk components based on the input parameters given.
The following table lists the point, link, and shape codes for this subassembly that have codes assigned to them. Point, link, or shape codes for this subassembly that do not have codes assigned are not included in this table.
Point, Link, or Shape |
Code |
Description |
---|---|---|
P1 | Flange | Flange point of the gutter |
P2 | Flowline_Gutter | Gutter flowline point |
P3 | TopCurb | Top of curb |
P4 | BackCurb, Sidewalk_In | Back of curb, integral, and boardwalk sidewalk |
P9 | Sidewalk_In | Inside edge of sidewalk on finish grade |
P10 | Sidewalk_Out | Outside edge of sidewalk on finish grade |
L1-L3 | Top, Curb | Finish grade on the curb and gutter |
L5 | Bottom | Bottom of curb |
L9, L13, L18 | Subgrade, Datum | Bottom of base |
L10 | Top, Sod, Datum | |
L11, L19 | Top, Sidewalk | |
L12 | Sidewalk_Bottom | Bottom of sidewalk |
S1 | Curb | Curb-and-gutter concrete area |
S2 | SubBase | |
S3 | Sidewalk | Sidewalk concrete area |
Curb and Gutter:
Curb:
Boardwalk Sidewalk:
Detached Sidewalk:
Integral Sidewalk: