The SLOCountyCurbs subassembly inserts links and shapes to create curbs, gutters, and sidewalks according to the County of San Luis Obispo Standard Plan.
You should verify that the dimensions used match your interpretation of the standard plan.
Curb and Gutter:
Curb:
Detached Sidewalk:
Integral Sidewalk:
Attachment
The attachment point is at the Lip (or FS) and the Back of Curb. This component can be attached to either the left or right side.
Input Parameters
|
Parameter |
Description |
Type |
Default |
|---|---|---|---|
| Side | Specifies which side to place the subassembly | Left / Right | Right |
| Curb Type | Type of curb or curb and gutter | Type A Curb 6" and 18" Gutter / Type C Curb 6" | Type A Curb 6" and 18" Gutter |
| Attachment Point | Attachment point for the curb or curb and gutter | Lip or FS / Back of Curb | Lip or FS |
| Sidewalk Type | What type of sidewalk should be used (or None) | Detached / Integral / None | None |
| Gutter Slope | Gutter slope, varies at curb ramps | Numeric | 6.90% |
| C & G Base Thickness | The thickness of base below the curb and gutter | Numeric, positive |
0.5 ft 0.15 m |
| S/W Base Thickness | The thickness of base under the sidewalk | Numeric |
0.33 ft 0.10 m |
| S/W Thickness | The thickness of the sidewalk | Numeric |
0.33 ft 0.10 m |
| S/W Width | The width of the sidewalk | Numeric, positive |
6 ft 2 m |
| Landscape Width | The width of the landscape when using a detached sidewalk | Numeric, positive |
3 ft 1 m |
| Pavement Grade | The grade of the pavement | Numeric | -2% |
| Pavement Thickness | Incoming pavement thickness | Numeric, positive |
0.8 ft 0.25 m |
Target Parameters
This section lists the parameters in this subassembly that can be mapped to one or more target objects. For more information, see To Specify Corridor Targets.
|
Parameter |
Description |
Status |
|---|---|---|
| Detached Sidewalk Offset | May be used to override the fixed sidewalk width and tie the inside edge of sidewalk to an offset alignment. The following object types can be used as targets for specifying the width: alignments, polylines, feature lines, or survey figures. | Optional |
| Back of Sidewalk Offset | May be used to override the fixed sidewalk width and tie the outside edge of sidewalk to an offset alignment. The following object types can be used as targets for specifying the width: alignments, polylines, feature lines, or survey figures. | Optional |
Runtime Logical Assignments
The dimensions of the curb and gutter are stored within the subassembly. At runtime the values are looked up and assigned based on the Curb Type selected.
Output Parameters
None.
Behavior
The initial point is set at the attachment point. The points, links, and shapes of the curb and gutter are build based on the Curb Type selected. The base is then placed under the curb and gutter.
If the sidewalk type is not set to None, then the appropriate sidewalk and base is built. If the sidewalk is Detached and the Detached Sidewalk Offset is set, then the inside sidewalk edge is adjusted. If the Back of Sidewalk Offset is set, then the widths of all sidewalk types are adjusted.
Layout Mode Operation
In layout mode, this subassembly displays the curb-and-gutter and sidewalk components based on the input parameters given.
Point, Link, and Shape Codes
The following table lists the point, link, and shape codes for this subassembly that have codes assigned to them. Point, link, or shape codes for this subassembly that do not have codes assigned are not included in this table.
|
Point, Link, or Shape |
Code |
Description |
|---|---|---|
| P1 | Flange | Flange of gutter |
| P2 | FL | Flowline of gutter |
| P3 | Front | Front of curb |
| P4 | Back, Sidewalk_In | Back of curb, inside edge of sidewalk |
| P11 | Sidewalk_Out | Outside edge of sidewalk |
| P16 | Sidewalk_In | Inside edge of sidewalk |
| L1-L3 | Top, Curb | Top of curb |
| L5, L6 | Bottom | Bottom of curb |
| L9, L11, L12, L15 | Subgrade, Datum | |
| S1 | CurbAndGutter | Curb and gutter concrete area |
| S2, S3 | Base | |
| S4 | Sidewalk | Sidewalk concrete area |
| S5 | Sidewalk_Base |
Coding Diagram
Curb and Gutter:
Curb:
Detached Sidewalk:
Integral Sidewalk:
