Setups Editor

Use this dialog box to view and edit survey setups.

Station Point

Displays the station point number.

Backsight Point

Displays the backsight point number.

Backsight Direction

Displays the direction of the backsight in the specified units.

Backsight Orientation

Specifies the orientation of the horizontal circle when backsighting the point. This is an optional value, and is assumed to be 0.00 unless you specify otherwise.

Instrument Height

Specifies the measured instrument (theodolite) height. This is typically measured from the center of the theodolite optics to the setup point on the ground.

Instrument Elevation

Specifies or displays the instrument elevation. If the setup point has an elevation, this field is read-only and displays the calculated instrument elevation (setup point elevation plus the instrument height). If the setup point has no elevation, then this column can be used to specify the instrument elevation.

Northing

Displays the northing value for the setup.

Easting

Displays the easting value for the setup.

Elevation

Specifies the elevation of the setup.