Use this dialog box to control the view of selected objects in your drawing.
The Object Viewer contains the ViewCube and the SteeringWheel. For more information, see "Use ViewCube" and "Navigation Wheels" in the AutoCAD Help.
Saves the current view as a separate file. The supported file formats are PNG, JPG, BMP, TIF.
Specifies the object appearance style. Set the style to one of the following:
Moves the current view without changing its size.
Increases or decreases the apparent size of objects in the current viewport.
Provides a Navigation Wheels menu that is divided into different sections known as wedges. Each wedge on the wheel represents a single navigation tool. You can pan, zoom, or manipulate the current view of a model in different ways.
Sets the display window to 3D orbit view.
Displaces objects a specified distance in a specified direction. This control is available only when the Perspective control is selected.
Specifies the current view. Set the view to either Top, Bottom, Left, Right,Front, or Back. Set the isometric view to either SW Isometric, SE Isometric, NE Isometric, or NW Isometric
Sets the view to a parallel plane.
Sets a perspective view and makes the Adjust Distance and Lens Length controls available.
Sets the length of the lens used in perspective viewing for the current viewport. This control is available only when the Perspective control is selected.
Zooms to display an area specified by a rectangular window.
Zooms to display a window defined by a center point.
Zooms to display the drawing extents and results in the largest possible display of all the objects in the window area.
Zooms in an increment as defined by the Zoom Factor.
Zooms out an increment as defined by the Zoom Factor.
Sets the zoom increments used by the Zoom In and Zoom Out commands.
Sets the view in the drawing equal to the view in the Object Viewer.
Specifies the object viewer display configuration.