Use this tab to specify the design criteria settings, including the design criteria file and design check set.
Specifies the name of the alignment. Each alignment must have a unique name.
Specifies an optional description of the alignment.
Specifies the station value that is assigned to the beginning of the first alignment entity created.
By default, this value is the lowest station that you specified, or the starting station of the beginning sub-entity that you selected.
Specifies the design speed at the alignment starting station. If no other design speeds are applied to the alignment, then the Starting Design Speed is applied to the entire alignment.
Specifies whether design criteria is applied to the alignment. If this check box is cleared, then the Use Design Criteria File and Use Design Check Set options are not available.
Specifies whether to associate a design criteria file with the alignment. If this check box is cleared, then the design criteria file selector and Default Criteria table are not available.
Specifies the design criteria file to associate with the alignment. The first design criteria file found in the C:\ProgramData\Autodesk\C3D <version>\enu\Data\Corridor Design Standards\<units> directory is used by default. Click to select a different design criteria file.
Displays the alignment standards formulas that are defined in the selected design criteria file. Click the Value column to change a criteria table.
Specifies whether to associate a design check set with the alignment. If this check box is cleared, then the Design Check Set list is not available, and the design check is not performed.
Displays the default design check set. You can either accept the default design check set, or use the list to select a different one from the drawing.
Edits or copies the current design check set, or creates a design check set.