Creates a point at the intersection of a line, curve, or spiral object and a direction line.
Specify values by picking points in the drawing, using transparent commands, or entering values at the command line.
- Select settings and create styles, layers, point groups, and description keys.
-
.
- Select an object.
- Specify the offset distance by doing one of the following:
- Enter a distance.
- Pick a point in the drawing.
- Use Transparent commands to specify a point to define the offset.
- Specify the start point by doing one of the following:
- Pick a point in the drawing.
- Use Transparent commands to specify the point.
- Specify the direction from the start point by doing one of the following:
- Pick a point in the drawing.
- Use Transparent commands to define the point.
- Enter Z, and then enter the azimuth of the direction line.
- Enter B, and then specify the quadrant and the bearing.
- Specify the offset distance by doing one of the following:
- Enter a distance.
- Pick a point in the drawing.
- Use Transparent commands to specify a point to define the offset.
- Enter a description, or press Enter to skip the description.
- Enter an elevation for the point, or press Enter to skip the elevation.