To Export Corridor Points as COGO Points

You can either export all points from a selected corridor or constrain the selection based on station ranges or point code types.

1. Click Corridor tabLaunch Pad panelPoints From Corridor Find.
2. In the drawing, click the corridor from which you want to export the points.
3. In the Create COGO Points dialog box, click For Entire Corridor Range to export all points or click For User Specified Range to select a range of points.
4. Optionally, if you selected For User Specified Range, click the Select A Baseline list to select the baseline or click and select an alignment in the drawing.
5. If you selected For User Specified Range, enter the start and end range in the Alignment Start and Alignment End fields, or click and click the locations in the drawing.
6. In the New Point Group Name field, enter the name for the point group that will contain all the extracted points.
7. Optionally, select the points you want to export, based on their point codes, by selecting or clearing the point code’s Select field in the Select Point Codes To Create table.
8. Click OK.

   The point group is created and is displayed in the Point Groups collection in the ToolspaceProspector tree. The points are displayed in the drawing using the default Point Group display settings. They are labeled with their point code names.