Use this tab to view and change the vertical range and split settings of the profile view.
Elevation Range
- Automatic Height
-
Specifies the elevation range for all profiles associated with the parent horizontal alignment, regardless of whether they are drawn in the profile view. The system refers to these values to set the default elevation range for the profile view.
- User Specified Height
-
Specify an elevation range if you want the profile view to show other than the full height of the horizontal alignment.
If the current profile view style includes a padding (buffer) setting, it is applied to expand the elevation range. The padding is set on the Grid tab of the Profile View Style dialog box.
Selecting User-Specified Height enables the Split Profile View controls.
Split Profile View
Selecting Split Profile View enables the Automatic and Manual controls.
- Manual
-
Splits the profile view at user-specified locations and allows using a different style for each split segment.
No: Sequential number of split segments.
Split Station: Starting station value of each split location. The split station of segment number 1 is the starting station of the profile view and is not editable. Enter a specific value or click to select a location on the profile view.
Adjusted Datum: Vertical split location. Enter a specific value or click
to select a location on the profile view. Profile View Style: Style selection of each profile view segment.
Add a split location. 
Delete a split location. - Automatic
-
Splits the profile view to fit it within the user-specified height, rounding to specified station and datum locations.
Station Rounding: Specifies where to round the horizontal split location (Previous Major Grid, Previous Minor Grid, or Exact Elevation)
Datum Rounding: Specifies where to round the vertical split location (Previous Major Grid, Previous Minor Grid, or Exact Elevation)
Note: Switching from manual to automatic clears all user-specified split settings.