Alignment Labels Dialog Box

Use this dialog box either to create and save label sets or to import an existing label set.

Type

Specifies the type of label, which is related to elements in the alignment that can be labeled. After you select a label type, you assign a style. Select one or more label types to include in the label set:

  • Major station
  • Minor station
  • Geometry points
  • Station equations
  • Design speeds
  • Profile Geometry Points
  • Superelevation Critical Points
  • Cant Critical Points
Note: You can add a label type multiple times in a label set. For example you could add geometry points twice and then apply a style to the first entry of geometry points at specified starting and ending stations. Then, in the second entry for geometry points, you could specify another style and the starting and ending stations where you want to apply that style.
<Label Type> Style List

Lists the styles available for the specified label type. Select a style from the list.

Style Selection

Specifies the style options. Create a new style, copy or edit the current style selection, or pick a style from the drawing.

Style Detail

Opens the Style Detail dialog box. Preview the style and creation information.

Adds the selected element and style to the label set.

Note: You must first select major stations in order to add minor stations.

Deletes the selected element in the label set.

Resets manual or grip edits that may have been made to any labels.

Type

Displays the label types added from the Type list.

Style

Displays the label style selected and added from the Style list. Click to change the style.

Increment

Displays the increment at which the label is displayed. To change the default value, click in the cell, and enter a new value.

Note: Increment does not apply to all label types.
Start Station

Displays the starting station at which the label is displayed. By default, the start station is at the beginning of the alignment. To change the default display, clear the check box and enter a new value.

End Station

Displays the ending station at which the label is displayed. By default, the end station is at the end of the alignment. To change the default display, clear the check box and enter a new value.

Geometry Points To Label

Specifies the geometry points to label for the Geometry Points, Profile Geometry Points, and Superelevation Critical Points label types. You can label a selection of geometry points in a label type using a selected style. You can then add another instance of the same label type, which can label a second selection of geometry points using a different style. Click to select the geometry points to label.

Profile

For Profile Geometry Points label types, specifies which profile’s geometry points are labeled on the alignment to change the profile.

Station Index Increment

When a station label style is in Station Index Format, this is the base value used to format the station labels.

For example, when station labels are displayed at 20-meter increments using the default Station Format, they are formatted as 0+00, 0+20, 0+40, 0+60, etc. If the same labels used the Station Index Format, with the Station Index Increment set to 10, the labels would be formatted as 0+0, 2+0, 4+0, 6+0, etc. Changing the Station Index Increment to 20 would format the labels as 0+0, 1+0, 2+0, 3+0, etc.

Import Label Set

Opens the Select Style Set dialog box. Select a previously saved label set style and use it on the current alignment. Importing a label set overwrites the existing setting on the Labels tab.

Save Label Set

Opens the Label Set dialog box. Configure the name and other settings for the current label set. This set is saved on the Toolspace Settings tab.