Use this dialog box to select a profile to include in an incremental station elevation difference report. This report compares an existing ground profile with a design profile and lists the station, existing ground elevation, design elevation, and the elevational differences between PVIs.
Specifies the design (layout) profile. You must select one. Only dynamic profiles are included in the list.
When you click on the design profile, the Start Station and End Station fields become active so you can specify the station range for the report.
Specifies the existing ground profile. You must select one.
Specifies the start station for the report. The Start Station and End Station fields are enabled only if one of the design profiles is selected in the list.
Specifies the end station for the report. The Start Station and End Station fields are enabled only if one of the design profiles is selected in the list.
Specifies the station interval to use when the Regular Interval option is selected.
Specifies that regular station intervals are included in the report. The interval is based on the Station Interval setting.
Specifies that tangent points in the horizontal alignment design are included in the report. For example, PT or PC points.
Specifies that tangent points in the vertical profile design are included in the report. For example, the start vertical tangent point.
Specifies that existing ground grade break points are included in the report.
Specifies the location and file type for the report. Click the button and specify the folder and file type.
Creates the report in the location specified and displays the report results.