Use this tab to edit settings for the section view style, such as the title location and format, use of tick marks, and annotations, on the vertical axis of the section view.
After you configure vertical axis title and tick details, click Apply. Later, you can change the Select Axis setting and configure another axis on the opposite side of the grid.
- Select Axis To Control
-
Click either the Left, Center or Right radio button to select that axis.
Major Tick Details
- Interval
-
Specifies the spacing of major ticks on the vertical axis. Enter a positive value in ground units.
- Tick Size
-
Specifies the length of the actual tick on the vertical axis, using plotted units. Enter a positive value in plotted units.
- Tick Justification
-
Specifies whether the tick is justified Left, Right or Center.
- Text Height
-
Specifies the height of text used to label major ticks on the vertical axis in plotted units. Enter a positive value in plotted units.
- Tick Label Text
-
Specifies a property with which the tick is labeled. To change the text format or content, click
to display the Text Component Editor dialog box. - Text Style
-
Specifies the style of the tick label text.
- Rotation
-
Specifies the angle for the tick label. Enter a positive or negative value.The angle direction is always counterclockwise. If the value is zero (0), the label is not rotated.
- X Offset
-
Specifies a horizontal offset for the tick label from the end of the tick.
- Y Offset
-
Specifies a vertical offset for the tick label from the end of the tick.
Minor Tick Details
- Interval
-
Specifies the spacing of minor ticks on the vertical axis, using the actual ground units. Enter a positive value in ground units.
- Tick Size
-
Specifies the length of the actual tick on the vertical axis, using plotted units. Enter a positive value in plotted units.
- Tick Justification
-
Specifies whether the tick is justified Left, Right or Center.
- Text Height
-
Specifies the height of text used to label minor ticks on the vertical axis, using plotted units. Enter a positive value in plotted units.
- Tick Label Text
-
Specifies a property with which the tick is labeled. To change the text format or content, click
to display the Text Component Editor dialog box. - Text Style
-
Specifies the style of the tick label text.
- Rotation
-
Specifies the angle for the tick label. Enter a positive or negative value.The angle direction is always counterclockwise. If the value is zero (0), the label is not rotated.
- X Offset
-
Specifies a horizontal offset for the tick label from the end of the tick.
- Y Offset
-
Specifies a vertical offset for the tick label from the end of the tick.