To Create a Right of Way

Parcels and adjacent alignment must be in the same site. Parcel boundaries are offset a specified distance from the alignment.

Optionally, specify a radius for fillets at intersections with other objects. The following illustration shows a right of way created between parcels 103 and 104 with fillets at intersections with parcel boundaries.

The right of way is like a narrow parcel, but it is not dynamically linked to the alignment. If you move or edit the alignment you must create the right of way again.

When you run the Create ROW command, you are prompted to select one or more parcels. If an alignment is found in the site and along an edge of the selected parcels, a right of way is created in accordance with the supplied parameters.

1. Click Home tabCreate Design panelParcel drop-downCreate Right Of Way Find.
2. Select one or more parcels in the drawing and press Enter.
3. In the Create Right of Way dialog box, specify the offset distance from the alignment to the parcel boundaries.
4. If you want corner fillets at parcel boundaries along the right of way, select this option. Specify a radius.
5. If you want corner fillets at intersections with other alignments and rights of way, select this option. Specify a radius.
6. Click OK.