To Create Points by Relative Location

Interpolates a point between two control points based on a distance.

Select an object (1) with two control points (2) and (3) and then specify a distance (4) and offset (5) to create the point.

1. Select settings and create styles, layers, point groups, and description keys.
2. Home tab Create Ground Data panel Points Menu Create Points - Interpolate By Relative Location .
3. Specify the interpolation region by doing one of the following:
   • Pick a point in the drawing and enter an elevation for the first point. Specify the second point and then either enter D to specify the difference in elevation between the two points, or enter S to specify the slope from the first point to the second point.
   • Use Transparent commands to specify the point.
   • Enter E, and select an arc, line, feature line, lot line, or polyline. Specify the distance and the offset distance by either entering the distance, picking a point, or using Transparent commands.
4. Enter a description, or press Enter to skip the description.