Create Pressure Network Reference Dialog Box

Use this dialog box to create a data reference to a pressure network.

Source Pressure Network

Specifies the pressure network data shortcut from which to create the reference. Click to change the data shortcut or display all available pressure network data shortcuts.

Network Name

Specifies a system-generated name for the pressure network reference. To edit the name, click .

Network Description

Specifies an optional description of the pressure network reference.

Parts List

Specifies the parts list associated with this pressure network reference.

Layers

Displays the layer on which the pressure network reference will be created. To change the layer click and select a layer.

Override Reference Surface

If you select this option, each referenced part references the surface specified here.

Override Reference Alignment

If you select this option, each referenced part references the alignment specified here.

Note: If neither Override Reference option is selected, each part from the source drawing matches the same-named object (surface or alignment) in the reference drawing. When specific parts reference surfaces or alignments that cannot be found in the reference drawing, the following warning appears in Event Viewer: Reference <Object> not found in reference drawing. In this case, these network parts are created with a value of <none> for the missing reference object.

Include Source Labels

If you select this option, labels or label sets are copied with the reference object as they exist in the source drawing. Otherwise, specified label style options apply and label styles will be created when the referenced parts are added to the drawing.

Pressure Pipe Label Style, Fitting Label Style, and Appurtenance Label Style

If you choose not to include the source labels, you can use these fields select the styles for the pressure network labels.