Use this dialog box to view the properties of connected alignments and to modify the curve radius or change the update status between dynamic and static.
- Connection In
- Displays the name of the first alignment that was specified for the connected alignment.
- Connection Out
- Displays the name of the second alignment that was specified for the connected alignment.
- Update Mode
-
- Dynamic: If set to dynamic, the connected alignment is updated dynamically if changes are made to the horizontal connection alignments.
- Static: If set to static, the connected alignment is not updated dynamically if changes are made to the horizontal connection alignments.
- Curve Group Type
- Displays the curve group type.
- Circular Fillet
- Spiral-Curve-Spiral
- Reverse Spiral-Spiral-Curve-Spiral
- Reverse Spiral-Curve-Spiral-Spiral
- Reverse Spiral-Spiral-Curve-Spiral-Spiral
- Three Centered Arc
For more information, see
Parameters Tab (Create Connected Alignment Dialog Box).
- Curve Radius
- Specifies the curve radius for the connected alignment. You can specify a different value if the
Update Mode is set to
Dynamic.
- Spiral Parameters/Curve Parameters
- Displays the parameters for the curve group type. Click the browse button
to open the
Spiral Settings dialog box or the
3 Centered Arc Settings dialog box to change the parameter settings.
- Offset In/Offset Out
- Specifies the offset values for the connected alignment. The values are measured from the existing alignments.
- Connection Overlap In/Connection Overlap Out
- Specifies the connection overlaps for the connected alignment.