Profile view band styles control the location and content of data bands.
Use the Toolspace Settings tab to create and edit profile view band styles. Use the Profile View Properties dialog box to specify which data band styles to use and where to place them on the profile view.
Data band labels are label objects that can be manipulated like other Autodesk Civil 3D label objects.
The types of data band styles that you can create:
This type of data band style... |
Provides this type of annotation... |
---|---|
Profile Data |
Stations, elevation of one or two profiles at each station, and elevation difference between two profiles at the station Note: The individual geometry points to label can be specified with the
Profile Data band type.
|
Vertical Geometry |
Geometric details of vertical tangents and curves |
Horizontal Geometry |
Geometric details of horizontal tangents, curves, and spirals |
Superelevation |
Critical transition stations and transition diagrams for the superelevation at curves |
Sectional Data |
Sampled station, material, typical section details, incremental distance and volume, balanced volume information |
Cant Data |
Applied cant and equilibrium cant lines, and labels and ticks at specified locations including End Level Rail, Begin Full Cant, End Full Cant, Begin Level Rail, and Cant Manual Station |
Point Proximity |
The distance between points in a point group and the alignment within an alert distance and beyond of the alert distance |
Alignment Proximity |
The distance between an alignment and the parent alignment within an alert distance, beyond the alert distance, and the closest and farthest points |
Speed |
Design speeds, design speed stations, and critical points |
Pipe Network |
Locations and key dimensions of pipe network parts, offset, elevation, direction |
Pressure Network |
Labels and ticks for pressure pipes, fittings, and appurtenances |
When you need a new data band style, it is usually easiest to find an existing style that is similar to what you need, then copy it and make the required changes. You can also create one and change whatever default values are not suitable.
The notes in this section describe what is unique to profile data bands.