Use the Corridor Transition Panorama vista to create and edit corridor transitions.
When you select the Edit Corridor Transition command, the Corridor Transition Panorama vista is displayed and a prompt is displayed at the command line to select the subassembly to transition.
Use the command line prompts to select which subassembly to transition and which parameter to transition, and then select stations, values, and transition type.
You can also specify and edit values in the Corridor Transition Panorama vista. When you select a row in the vista, the corresponding transition region is marked with blue symbols in the drawing.
Buttons and drop-downs
- Baseline Selection
- Specifies the baseline in the corridor to which you want to add or edit transitions.
Create a New Transition Set- Creates a new transition set in the Panorama vista. Select the icon and then use the command line prompts to define the transition set.
Insert a Transition Below- Inserts a new transition below the current row in the Panorama vista.
Insert a Transition Above- Inserts a new transition above the current row in the Panorama vista.
Delete Line- Deletes the currently selected row in the Panorama vista.
Note: If you select the last transition in a transition set and click Delete Line, it will clear the transition information, but will not delete the selected row.
Import Transitions- Imports transitions from a CSV file.
Export Transitions- Exports transitions to a CSV file.
Data Table
- Subassembly
- Specifies the subassembly to transition. Click
to select a different subassembly. - Parameter
- Specifies the selected parameter in the subassembly to transition. Click the drop-down arrow to select a different parameter to transition.
- Start Station
- Specifies the start station of the transition. Click
to select a station in the drawing. - Start Value
- Specifies the start value of the parameter to transition.
- End Station
- Specifies the end station of the transition. Click
to select a station in the drawing.
- End Value
- Specifies the end value of the parameter to transition.