Use this page of the dialog box to review the analysis results and to apply them to the pipe network.
When you click the Analyze button in the Analyze Gravity Network dialog box, the Results page is displayed.
Visual cues and tooltips are displayed to indicate the analysis results.
When you select a row in the results table, the right panel displays detailed information about the pipe and structure in the selected line, and the corresponding line in the drawing is highlighted.
You can access commands to zoom to, pan to, and select a line in the drawing by right-clicking the row and selecting a command on the context menu. Selecting the line selects both the pipe and the structure.
As you select a row in the results table, the line is highlighted in the plan and profile views in the drawing and additional details are displayed on the right side of the dialog box.
If the Resize Pipes and Reset Inverts analysis type was selected on the General page, and a pipe diameter was resized, this column will contain either an up arrow or a down arrow. When you place your cursor over the arrow, a tooltip is displayed that explains how the pipe was resized.
If the velocity is below the minimum velocity or above the maximum velocity specified in the Settings, this column is shaded red. When you place your cursor over the cell, a tooltip is displayed that shows the amount by which the velocity is below the minimum or above the maximum.
This column is displayed if Resize Pipes and Reset Inverts is selected on the General page.
This column is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Details about the issues are displayed on the right side of the dialog box.
This column is displayed if Inlet Analysis is selected on the General page.
This column is displayed if Inlet Analysis is selected on the General page.
When you select a row in the results table, the right panel displays detailed information about the pipe and structure in the selected line. Different details are shown depending on the analysis types that are selected on the General page.
Displays the total amount of flow that is passing through the pipe.
This row is displayed if Resize Pipes and Reset Inverts is selected on the General page.
Displays the HGL of the upstream end of the pipe.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the HGL of the downstream end of the pipe.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the EGL of the upstream end of the pipe.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the EGL of the downstream end of the pipe.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the invert of the upstream end of the pipe.
This row is displayed if Resize Pipes and Reset Inverts or Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the invert of the downstream end of the pipe.
This row is displayed if Resize Pipes and Reset Inverts or Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the structure type.
This row is displayed if Compute Energy and Hydraulic Grade Lines or Inlet Analysis is selected on the General page.
Displays the rim elevation of the structure.
This row is displayed if Compute Energy and Hydraulic Grade Lines or Inlet Analysis is selected on the General page.
Displays the HGL of the structure.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the EGL of the structure.
This row is displayed if Compute Energy and Hydraulic Grade Lines is selected on the General page.
Displays the total amount of flow that is either captured by, or bypasses, an inlet structure.
This row is displayed if the structure is an inlet and Inlet Analysis is selected on the General page.
Displays the amount of flow that is captured by an inlet structure.
This row is displayed if the structure is an inlet and Inlet Analysis is selected on the General page.
Displays the amount of flow that bypasses an inlet structure.
This row is displayed if the structure is an inlet and Inlet Analysis is selected on the General page.
You can zoom and pan to an existing profile view to see a preview of the EGL, HGL, and pipe changes. The colors shown in profile view are specified in the Default Settings page, which you can access from the General page of the dialog box.
The following illustration shows the existing pipe network in profile view.
The following illustration shows how the preview graphics might appear.
In the preview, structure depths are not adjusted because they are connected to the original pipes rather than the resized ones. However, when the results are applied to the pipe network, the structure depths are adjusted to accommodate the adjusted pipes, as shown in the following illustration.
The following illustration shows a detail of the EGL and HGL lines in the preview.
For more information about the data included in the .csv file, see About the Gravity Network Analysis Results Report.