Use this dialog box to create or edit a baseline for a corridor. The baseline can be comprised of an alignment and profile or a feature line.
-
Baseline Name
-
Specifies the format of the corridor baseline name. Click
to open the Name Template dialog box.
- Baseline Type
- Specifies whether the baseline will be comprised of an alignment and profile or a feature line.
- Alignment and Profile: Specifies that the baseline will be comprised of an alignment and profile, and displays the
Horizontal Alignment list so you can select the alignment.
-
Horizontal Alignment
-
Lists the horizontal alignments that are available. Click
to select an alignment in the drawing.
- Feature Line: Specifies that the baseline will be comprised of a feature line, and displays the
Site and
Feature Line lists so you can select the feature line.
-
Site
-
Lists the sites that are available. Select a site from the drop-down list or click
to select an object in the site in the drawing, which selects the site and filters the list of feature lines.
Note: Leave this as <None> to list the feature lines that are not stored in a site.
-
Feature Line
-
Lists the named feature lines that are available in the specified site or that are outside of a site. Select a feature line name from the drop-down list or from the drawing. If you select the feature line from the drawing without first selecting a site, the site will also be selected.
Tip: If a feature line is not named, it will not appear in the drop-down list. You can click
to select a feature line (named or unnamed) in the drawing. If the selected feature line is not named, the
Apply Feature Line Names dialog box is displayed so you can enter a name for it.
You can select feature lines that have been created using the feature line creation tools,
including dynamic or static feature lines that have been extracted from a corridor.