About Standard Shape Codes for Subassemblies

A set of standard codes define the display and behavior of the shape components used in the Autodesk Civil 3D Corridor Modeling subassemblies.

The following illustration shows the location of some standard shape codes on subassemblies defining an undivided road with a curb-and-gutter:

Undivided Road with Curb-and-Gutter

The table below names and describes the standard shape codes used in the example assembly illustration.

Shape Codes

No.

Code

Description

1

Pave1

Closed shape between the finish grade and first pavement surface on paved sections.

2

Pave2

Closed shape between the first and second pavement surface on paved sections.

3

Base

Closed shape between the second pavement surface and the base surface on paved sections.

4

SubBase

Closed shape between the base and subbase surfaces on paved sections.

5

Curb

Closed area within a concrete curb or curb and gutter.

6

Sidewalk

Closed area within a concrete sidewalk.

To view all actual code numbers, the code names and brief code descriptions: In Notepad, open C:\ProgramData\Autodesk\C3D <version>\enu\C3DStockSubassemblyScripts.codes.