Refer to this section for high-level descriptions of tasks used for working with a pressure network in profile view.
| Lay out the pressure network in plan view |
Laying out the pressure network in plan view creates the horizontal information for the network and also creates vertical (elevation) information. |
| Create an alignment from the pressure network |
Select a path along one pressure network from which to create the alignment. |
| Insert the profile view into the drawing |
The Create Alignment From Pressure Network dialog box has an option that creates a profile and profile view. This inserts a profile view with the pressure network parts into the drawing. |
| Use the Pressure Network Profile Layout tools to refine the design | Use the tools on the Pressure Network Profile Layout ribbon to refine the profile layout to meet constraints and avoid underground constrictions. |
| Perform a depth check | You can check that the pressure network is within the allowed minimum and maximum depths. |
| Edit the design in profile view to resolve issues |
You can use the ribbon tools and grips to edit the pressure network in profile view. |
| Review and edit the design in plan view |
Editing a part in either plan or profile view edits the model so the change is carried through to both plan and profile views. |