Use this dialog box to specify settings for removing vertices and elevation points from feature lines, parcel lines, and 2D or 3D polylines.
Weeding Factors
Select one or more weeding factor to apply. Larger values remove more points. If more than one factor is specified, both factors have to be met before the point is selected for weeding.
When you change a value, the display in the drawing is updated with red glyphs to show the points that will be weeded.
- Angle
-
Specifies the weeding angle.
- Grade
-
Specifies the weeding grade.
- Length
-
Specifies the weeding distance. Enter the distance value or click
to select it in the drawing.
Close Point Removal
- 3D Distance
-
Specifies the 3D distance for weeding. Points that are close together in plan view, with slightly different elevations can be weeded using this setting.
