Specifies standard features for the Xerox Wide Format Print System 8830.
The Xerox Wide Format Print System 8830 is an LED wide-format printer with a powerful PowerPC 603e-based embedded controller. It can be directly connected to your network, and the client software suite supports multiple platforms and operating systems. It offers true 400 DPI resolution, three IPS imaging speed, a high performance controller, three roll media capability, manual sheet bypass and several finishing options. The Xerox Wide Format Print System 8830 is capable of producing up to six D-size or three E-size prints per minute, and 8830 includes a complete suite of client software, along with multiple printer drivers.
Standard features include:
- Xerographic LED process and imaging
- Organic photoreceptor
- Three 500-foot rolls and media sheet bypass
- Bond, vellum, and film media types
- Output sizes from A to E
- Long plots up to 40 feet standard and 80 feet with 104 MB SDRAM or optional hard drive configuration
- 400 DPI imaging
- 64 MB SDRAM
- High-performance controller
- Three inches per second processing speed
- Electronic collation
- Remote printer and job queue management
- Autoport sensing
- Data format recognition
- Scaling and rotation
- Size detection
- Roll selection
- Justification and margin control
- Plot labeling
- Banner pages
- Page composition
- Plot stamping
- Nine pen pallets (256 pens each)
- Forty-eight pen patterns
- Ten user setups
- Microsoft® Windows and AutoCAD drivers
- Engineering Document Exchange
- TCP/IP, Novell 3.X and 4.X, and Net-BEUI network protocol
- Interfaces: RS232, bi-directional Centronics IEEE 1284, 10/100 Base TX Ethernet
- Standard data formats: HP-GL, HP-GL/2, HP-RTL, CGM (Level 1 with ATA ext.), C4, FileNet, VDS, Calcomp 906/907/951/PCI, TIFF 6.0, NIRS, CALS 1 & 2
- Compression types—CCITT-G4, G3-1D, G3-2D, Packbits, RLE, Seed Row, Adaptive