Specifies standard features for the Xerox Wide Format Print System 8825.
The Xerox Wide Format Print System 8825 is an LED wide-format printer with a powerful PowerPC 603ev-based embedded controller. It can be directly connected to your network, and the client software suite supports multiple platforms and operating systems. It offers true 400 dpi resolution, three IPS imaging speed, a high performance controller, one or two roll media capability, an optional manual sheet bypass, and several finishing options. The Xerox Wide Format Print System 8825 is capable of producing up to four D-size or two E-size prints per minute and includes a complete suite of client software, along with multiple printer drivers.
Standard features include:
- Xerographic LED process and imaging
- Organic photoreceptor
- One 500-foot roll; optional second 500-foot roll; optional manual sheet bypass
- Bond, vellum, and film media types
- Output sizes from A to E
- Long plots up to 48 feet standard and 80 feet with 128 MB SDRAM or optional hard drive configuration
- 400 DPI imaging
- 64 MB SDRAM
- High-performance controller
- Three inch per second processing speed
- Electronic collation
- Remote printer and job queue management
- Autoport sensing
- Data format recognition
- Scaling and rotation
- Size detection
- Roll selection
- Justification and margin control
- Plot labeling
- Banner pages
- Page composition
- Plot stamping
- Nine pen pallets (256 pens each)
- Sixty-four pen patterns
- Ten user setups
- Microsoft® Windows and AutoCAD drivers
- Engineering Document Exchange
- TCP/IP network protocol
- Interfaces: RS232, bi-directional Centronics IEEE 1284, 10/100 Base TX Ethernet
- Standard data formats: HP-GL, HP-GL/2, HP-RTL, CGM (Level 1 with ATA ext.), C4, FileNet, VDS, Calcomp 906/907/951/PCI, TIFF 6.0, NIRS, CALS 1 & 2
- Compression types—CCITT-G4, G3-1D, G3-2D, Packbits, RLE, Seed Row, Adaptive