Specifies settings that show the owner of the output, if a banner is placed on the output, among other options.
The Options tab contains the following options:
Identifies of the owner of the printer output. The contents of the Owner field may be included on a user label.
Controls banner page selection and output position.
No banner page is output.
A banner page is output before the plot.
A banner page is output after the plot.
Flips the image about one axis. Use this option when the output is to film media, so that the image is on the back of the media, and the front can be marked up with a marking tool.
Controls image processing on the AccXES controller to improve image quality for a given document. You can set the document type to Auto Select, Graphics, Lines & Text, or Photo.
Controls the operation of an optional finisher. You can control the finisher type by specifying a FIN file that defines the finisher type and the programs that are known to the finisher.
Three default FIN files are distributed with this AutoCAD driver (8830ANSI.FIN, 8830ARCH.FIN, and 8830ISO.FIN). See the Xerox website for a FIN file generator that you can use to generate your own FIN files.
Specifies the type of finisher as specified in the FIN file.
| Not Installed | No finishing information is included in the plot. |
| Finisher Bypass | The finisher is bypassed (the plot is not folded). |
| Printer Default | The printer default behavior for finishing is used. |
| <Add Finisher> | A dialog box is shown in which you can specify which FIN file to add. |
When you add or select a finisher, the FIN file is read, and any finisher programs defined in the file are added to the Program drop-down list.
Specifies the finisher program to be used. When you add or select a finisher program, the Sort Bin drop-down list is displayed with valid bin selections.
Specifies the valid bin selection.
Provides a list of available title block override settings. Options are:
Depending on the finisher program, you may be able to modify the selections for