Define a Composite Layup

Create a composite layup section after the part and material have been created.

The composite layup editor is used to create plies and to assign materials and orientations to these plies.

1. Select Main Menu > Preprocessor > Sections > Shell > Lay-up > Add/Edit.

2. Since the plate is eight plies thick, click the Add Layer button until there are eight layers.

3. Enter 0.005 for all thickness values.

4. Enter the orientations for plies 1 thru 8 as 0, 45, -45, 90, 90, -45, 45, 0, respectively. The dialog box should appear as shown below. Note the Material ID values may differ depending on the materials in your Material Library.

5. Click OK.