Changes hole parameters (type, diameter, and so on) in a pin generator.
| Access: |
On the ribbon, click the Design tab, Fasten panel. Click any Pin Generator, Design tab, Items area, click the Custom Properties commands. |
|
Type |
You have several options to select the type of hole. Depending on the selected option, the hole is adjusted. For example, if you select the Loose option and click OK, you can see that the hole dimensions are changed in the Design tab of the pin generator. |
|
Designation |
For some holes, there are more possible dimensions for the bolt type. Specify the hole more accurately by selecting the appropriate designation. |
|
|
Confirms the component's inputs. |
|
|
Closes the dialog box. |
