Sprue Bushing Reference

Creates a custom or vendor sprue bushing.

Access:
  On the Mold Assembly tab, click Sprue Bushing.
Type
Type

Specifies the type of sprue bushing in the drop-down list.

Placement - Linear
Reference 1

Specifies the first reference edge of the sprue bushing.

Flip Side

Reverses the direction of the reference edge.

Reference 2

Specifies the second reference edge of the sprue bushing.

Flip Side

Reverses the direction of the reference edge.

Placement - From Runner Sketch
Point

Specifies the location of the sprue bushing. In the graphics window, select the runner sketch geometry, sketch point, or end point as the reference.

Ratio Adjusts the position of the sprue bushing along the sketch geometry. Not available if you select a sketch point or end point.

Offset Defines the offset value of the sprue bushing along the Z axis.
Parameters Modifies the parameters of the sprue bushing.