Tube and Pipe Library Browser Reference

Search for and select parts that are compatible with the selected style and set filter criteria to narrow the search.

Access:

In the Tube & Pipe Styles dialog box under Components, right-click in any row and select Browse or double-click the component row.

List of compatible parts	Lists the components that match the filter criteria. Click a family or a family member in the list to include in the style. The selected item is display in the Components table on the Tube & Pipe Styles dialog box.
Diameter	When enabled, filters the family member data to use for segments in routes and runs based on size. Nominal sets the nominal diameter values and schedule to use for rigid and bent tube routes and runs. Available schedules are based on the selected nominal diameter, material, and specification. To set the nominal value, click the arrow to select from the list. To select a schedule, click the arrow, and then select from the list. If no schedule is available, you can also use the inside diameter value. OD/ID sets the values for the outside (OD) and inside (ID) diameters for rigid pipe and tube segments. Available IDs are based on the selected OD. Click the arrow to select from the list.
Filters	Sets the style criteria to reduce the number of parts displayed in the list.
End Treatment	When enabled, filters the data based on the selected end treatment. Click the arrow to select from the list.
Standard	When enabled, filters the data based on the selected standard. Click the arrow to select from the list.
Material	When enabled, filters the data based on the selected material. Click the arrow to select from the list.
Angle	When enabled, filters the data based on the selected angle limits. Specify a value between 45 and 90 degrees. You can specify a single angle value for the filter.
	Opens the Tube and Pipe Angle calculator dialog box. You can filter the fittings based on the angle calculated from drop and distance input.
	Queries the data based on the current filter settings.