On the
Core/Cavity tab, click
Part Shrinkage
.
Selects the mold coordinate system.
Selects the part coordinate system.
Selects a user coordinate system.
Select this check box if you want the shrinkage values to be equal in all directions. When the Isotropic check-box is selected, only one of the X, Y, Z fields is available as the shrinkage is the same in all directions.
Replace with the following: To describe shrinkage that is different in each of the three principal directions, enter the value in the appropriate field. If you select the Isotropic check-box, only one field is active because the shrinkage is the same in all directions.