Control display and occurrence order for looms

Set loom display for all segments, wires, and cable wires

1. In the browser, activate a harness assembly.
2. Right-click the harness assembly, and then select Harness Settings from the context menu Wires/Cables tab
3. Clear or select the Appearance from Loom check box.
4. Click the Segments tab.
5. Clear or select the From loom check box.
6. Click OK.

Set loom display for individual segments, wires, and cable wires

1. In the browser, activate a harness assembly that contains the harness objects with looms assigned.
2. In the browser or graphics window, right-click a wire or cable wire with an assigned loom, and then select Harness Properties from the context menu Display tab.
3. Clear or select the Appearance from Loom check box.
4. Click OK.
5. Right-click a segment with an assigned loom, and then select Harness Properties from the context menu Display tab.
6. Clear or select the From loom check box.
7. Click OK.

Change loom ID

1. Activate a harness assembly.
2. In the browser or graphics window, right-click, and then select Harness Properties from the context menu.
3. On the Occurrence tab, enter a Loom ID or click the arrow to select from the list.
4. Click OK.

   The loom definition for the occurrence changes to the definition of the selected loom.

Note: Loom ID can only be changed for looms assigned to segments. If the new assigned loom ID already exists and is not used by a segment, the color of the new ID text is red, indicating an error. The loom ID is not applied.

Change loom order

1. Activate a harness assembly.
2. In the browser or graphics window, right-click a wire, cable wire, or segment that has a loom attached, and then select Harness Properties from the context menu.
3. Click the Display tab.
4. In the order list, select the loom occurrence to reorder.
5. Click the up or down arrow to increase or decrease the order of the loom in the list.
6. Click OK.