Checks cooling channels for safety, interference, and distance between cooling system segments.
- Access
- On the Mold Layout tab, click Cooling Channel Check
.
Settings
- Safety Check
- Checks the distance between the selected cooling segments and components for safety violations.
- Interference Check
- Checks the distance between the selected cooling segments and components (such as pins, screws, and guides) for interference violations.
- Cooling System Check
- Checks the distance between the selected cooling segments for minimum distance violations.
- Minimum Distance
- Specifies the minimum clearance distance.
Selection
- Selection Set #1
- Selects the cooling segments for checking. Click Select All to select all cooling segments.
- Selection Set # 2
- Selects the components for safety and interference checking. Select the cooling segments for cooling system checking. Click Select All to select all cooling segments.
- Use the Last Selection Set
- Reuses the previous selection sets. Use to recheck the cooling system after making changes to the model.
Quick Define Set # 2
- All Cores/Cavities
- Click to select all cores/cavities for a safety check.
- Mold Base Plates
- Click to select all mold base plates for a safety check.
- All Ejectors
- Click to select all ejectors for an interference check.
- Mold Base Components
- Click to select all mold base components for an interference check.
Cooling Errors Detected
Reports the quantity of errors detected.
- More
- Lists the items, parts, and error volume. Right-click and select Find in Window to zoom to the selected error in the graphics window.
- Additional Information
- Click
to copy the error list to the clipboard. Click
to print the error list.