IvRadiusDimension creates an Radius Dimension in an Inventor drawing.
IvRadiusDimensionModifier
IvCommonCircularDimensionMixin
IvInspectionDimensionMixin
BaseInventorMixin
BasePart
| Name | Type | Description |
|---|---|---|
| Entity1 | String | Name of an edge, surface or vertex of to be referenced. |
| Part1 | Part | Part to be dimensioned. |
| TextOrigin | Point | Text origin of dimension value. |
| View | Part | View that contains the parts to be dimensioned. |
| Name | Type | Description |
|---|---|---|
| AllowEmpty? | Boolean | If False (old behavior), with creation errors, the exception is thrown.
If True, the creation errors are ignored and the %%updateSelf Rule is set to NoValue (though the dimension child is still in the intent tree, it is not created in Inventor drawings). Default: False. |
| ArrowheadsInside? | Boolean | Should arrowheads be inside the leader lines? |
| Arrowhead1Inside?
Arrowhead2Inside? |
Boolean | Indicates that the arrowhead is inside. |
| Arrowhead1Type
Arrowhead2Type |
Name | Indicates the type of the arrowhead Possible.
Values: :ByStyle, :Blank, :Circle, :Closed, :Datum45Blank, :Datum45Filled, :Datum60Blank, :Datum60Filled, :Filled, :Flared, :Half1Filled, :Half1Flared, :Half2Filled, :Half2Flared, :LargeDot, :None, :Oblique, :Open, :Origin, :SmallDot, :ThickLine. Default is :ByStyle. |
| ClosestPoint1 | Point | Points used to select the correct drawing curve on the view. In case of several curves representing the entity, the one closest to the point is selected. Measure of closeness is a distance from the point to the center of the curve's bounding box. |
| Color | String | Specifies the color to be used for the dimension. By default, controls both the dimension lines and the text. |
| ColorDimLines | String | Color of dimension lines. By default, the value of the 'color' parameter is used. |
| ColorText | String | Color of dimension value. By default, the value of the 'color' parameter is used. |
| DimStyle | String | Inventor dimensioning style to be used. |
| ExtensionLine1Visible?
ExtensionLine2Visible? |
Boolean | Indicates that the extension line is visible. |
| FormattedText | String | Text to be appended to the dimension value. The text should be formatted ? refers to format(). |
| HorizontalJustification | Name | Horizontal alignment of text, possible keywords are: :left, :center, :right. |
| InspectionDataLabel | String | Formatted text placed left of the dimension value.
Default: Empty string. |
| InspectionDataShape | Name | The border shape: can be one of the following: :AngularEnds,:NoBorder,:RoundedEnds.
Default is :RoundedEnds. |
| InspectionDataRate | String | Formatted text (percentage value) placed to the right of the dimension value.
Default: Empty string. |
| IsInspectionDimension? | Boolean | Enables the inspection data on the dimension.
Default: False. |
| Intent1 | Any | Type of dimension point , possible keywords: :startPoint, :endPoint, :midPoint, :centerPoint, :circularLeftPoint, :circularRightPoint, :circularTopPoint, :circularBottomPoint. |
| Layer | String | Name of layer for the dimension. |
| LeaderFromCenter? | Boolean | Indicates whether the leader starts from the center of the arc or the circle. |
| LineSpacing | Number | Line spacing |
| LineSpacingType | Name | Type of line spacing, possible keywords are: :Multiple, :Exact. |
| Precision | Integer | The number of decimal places displayed for this dimension.
Valid values 0…8 or NoValue. Default: NoValue. |
| ToleranceHole | String | The string specifying hole tolerance.
Default: NoValue. |
| ToleranceLower | Number | The lower variation from the nominal value.
Default: NoValue. |
| ToleranceMethod | Name | Specifies the tolerance type.
Valid values: :Basic, :Default, :Deviation, :LimitLinear, :LimitsFitsLinear, :LimitsFitsShowSize, :LimitsFitsShow, :LimitsFitsStacked, :LimitsStacked, :Max, :Min, :Override, :Reference, :Symmetric or NoValue. Default: NoValue. |
| TolerancePrecision | Integer | The number of decimal places displayed for the tolerance.
Valid values 0…1 or NoValue. Default: NoValue. |
| ToleranceShaft | String | The string specifying the shaft tolerance. |
| ToleranceUpper | Number | The upper variation from the nominal value.
Default: NoValue. |
| VerticalJustification | Name | Vertical alignment of the text, possible keywords are: :upper, :middle, :lower. |